Genel
ROMO Wind’s iSpin Guardian approach provides transparency in wind farm performance monitoring
ROMO Wind’s iSpin Guardian approach allows wind farm operators to monitor and actively manage the performance of every wind turbine in a wind farm at any time during its lifetime, independent of site complexity. The iSpin Guardian approach, which uses patented spinner anemometer technology, allows operators to compare the performance of individual turbines in a wind farm for the very first time. ECN (Energy research Centre of the Netherlands) has evaluated the approach.
ECN is a globally-renowned renewable energy R&D institute and founding member of the industry-wide acknowledged MEASNET association. In its report, ECN confirms that the iSpin Guardian approach “based on the presented cases is well-suited to monitoring the relative performance of the turbines in a wind farm, which can be used to identify potential performance issues and which needs to be further validated.”
In most cases today, performance measurements on wind farms are limited to one or two nominated turbines with free wind sectors, defined flat areas and using dedicated met masts – which does not allow accurate assessment of performance of all turbines in a wind farm. The systemic advantage of the iSpin Guardian’s spinner anemometer is that it measures the wind where it first hits the turbine – directly at the spinner.
Dr. Jan Willem Wagenaar, Project Manager and Researcher at ECN, says: “As the wind industry grows more mature and therefore more demanding, new and innovative means are appearing which overcome identified limitations. In ECN’s view, the iSpin Guardian approach is a promising new and innovative method for assessing the performance of all turbines in a wind farm.”
Jan Nikolaisen, CO-CEO at ROMO Wind, adds: “Today, only the iSpin technology enables a holistic overview of the performance of individual turbines and the wind farm itself. The current industry standard of using a met mast is too expensive, impractical and imprecise for the industry’s needs. With the iSpin Guardian approach, we offer a tool that can cheaply and repeatably provide transparency in wind farm performance.”
ECN also evaluated the potential of the iSpin Guardian approach to be used in warranty contracts between wind turbine manufacturers and wind farm operators.
•The potential benefit for the operator: iSpin Guardian offers more means to validate the power performance of the individual wind turbines in the wind farm and the wind farm itself.
•The potential advantage for the wind turbine manufacturer: more attractive warranty conditions could be granted, providing an advantage over competitors.
According to ECN the key aspect is the 360° iSpin based power curve and ECN advises to further validate this aspect for industry-wide acceptance.
Nikolaisen says: “In order for the iSpin Guardian approach to be adopted in warranty contracts, we will initiate independent studies in the near future to demonstrate that the 360° iSpin based power curve is not affected by any kind of wake or terrain conditions. Further proof and evidence will increase acceptance in the whole wind industry and lead to incorporation of the iSpin Guardian approach into internationally acknowledged guidelines – and thereby help to make this unique technology the new industry standard.”
-
Events5 years ago
Canada and Turkey women working in the renewable energy sector in met
-
Manufacturers of wind turbines5 years ago
GE’s Haliade-X 12 MW prototype to be installed in Rotterdam
-
Operations and Maintenance6 years ago
GENBA is on the rise; another milestone passed by in global existence
-
Genel8 years ago
EWT launches the DW61, It’s most efficient and high energy producing wind turbine
-
Genel9 years ago
Internet of things will empower the wind energy power plants
-
Turbine Manufacturing6 years ago
İğrek Makina focused on developing and producing Machine Tools and Wind Energy Turbines
-
Energy management systems5 years ago
Demand/Supply – Renewable energy with guarantees of origin (GO)
-
Events5 years ago
Key Players from 10 Nations will Show Their Strong Positions at APWEE
-
Manufacturers of wind turbines5 years ago
The Nordex Group receives first order for Delta4000 turbines from the USA
-
Manufacturers of wind turbines4 years ago
ENERCON installs E-160 EP5 prototype
-
Genel8 years ago
Zorlu energy envisages a bold new future based on renewables
-
Manufacturers of wind turbines5 years ago
ENERCON and Lagerwey together develop two new WEC types